Here is the 9th video of A beginners guide to RC Helicopters. In this video you will watch and learn about gyros. Comments and feedback welcome at alishanmao@gmail.com or ali@redcatracing.com Don't forget to check www.redcatracing.com http www.rctoyhouse.com and http

yuck! you have bug guts on your blades… lol
and were do you buy the trex 700
ok what about the trex 700???
@herecomesdabomb1 Go with Walkera V500D01 if you want RTF or go with Align TREX600E if you want ARF best heli
hey more thing i just earned $1,500 dollars whats like the BEST rc helicopter?????
@alishanmao thanks!!!
@herecomesdabomb1 Better Transmitters are computerized / digital programmable transmitters. they give you better flight performance, better range and more control over your model
@herecomesdabomb1 Try Some TREX
Thanks so much!!!:D
@herecomesdabomb1 set all trims to zero. turn on the power on radio and helicopter, now manually set the swash plate horizontally level by taking the connecting rods off and increase decrease their length. once done. fly and set trims if needed
Hello I’ve watch almost all your videos and a you are a BIG help to all!! I just purchased a blade 120 sr, and I can’t figure out why it like to drift left/ and backwards, and the trimming doesn’t work, it would be much appreciated if you could give me some hints, or suggestions!!! Thanks much
@obesinawa i think i did not upload 10
@alishanmao I find your tutorials really helpful. Have you uploaded tutorial 10 onwards? please direct me to it as im being a little thick
I find your tutorials really helpful. Have you uploaded tutorial 10 onwards? please direct me to it as im being a little thick
@alishanmao thanks, anyone you recomend?
@CumminsRescue24 just replace the hub
@mbe575s you need lots of flight simulator practice else its a first flight crash for sure
I got a 6 ch cheap and it is my first heli other than little 2 or 3 ch helis. How should I start learning how to fly it? is a flight simulator a must?
Very helpful!…thanks.
hey thanx, one other thing is the cheap plastic main rotor hub cracked where the pin goes through to hold it to the shaft, can I replace that with a metal 1 or will I then have to replce all the rotor components over to metaal if I do that?
@CumminsRescue24 maybe you are plugging the Rudder servo to gyro in wrong polarity
Hey, Im very new in the RC heli world, I managed to pick up a Storm 430 for $50 and after some tinkering I went through the reciever and re-connected everything due to the fact that it was wired completely wrong. I realized that when the Gyro is plugged in and the rudder is plugged into the gyro the rudder will not work, but if I unplug the gyro and plug the rudder into its place on the reciever the rudder works just fine. Why is this?
this is the most informative vid about gyros on youtube, helped big time, thank you very much. I was confused with those but now it’s crystal clear.
How can I set the giro, turning right, left the DL button?
lol at 0:45 on the sheet : point ii. CP helis 6ch, those sexy curves