Does your RC helicopter spin out of control in the air or uncontrollably on the ground, are the batteries charged and it still doesn't work? Is the trim set all the way and it still doesn't work, don't worry, it's not as big of a deal as you may think, and you can fix it quicker and cheaper than you ever imagined. I tried to fly my syma s008 Sunday morning and it didn't want to fly. It did the same thing a number of my viewers have asked about. It spun on the ground and wouldn't get more than a few inches in the air. The problem isn't the batteries in the transmitter or the helicopter, and it isn't a bad motor. This is a cheap simple solution that works on almost all 2 and 3 channel helicopters. The key is to spin the rotor in your hand and try to see if it gives any resistance. Thanks for watching rc 101 with the Taoistflyer tune in for more fun aircraft videos.
Video Rating: 5 / 5
Incoming search terms:
- z008 helicopter problem
- gyropter troubleshooting
- propel gyropter troubleshooting
- propel rc gyropter troubleshooting
- gyropter repair
- gyro flyer problems
- bladez helicopter problems
- u4 metal series
- gyropter problems
- how to fix gyropter
- phantom s107 troubleshooting
- v911 helicopter problems
- model king helicopter troubleshooting
- propel helicopter manual
- gyrocopter propel rc troubleshoot
- gyropter bottom blade turns top one doesn\t
- u4 gyro rc helicopter review
- protocol accelerator helicopter problems
- how to fix propel helicopter
- s107g troubleshooting
- series 2ch-777
- gyropter what makes it spin and not fly
- phantom ii rc helicopter instructions
- 9116 heli spins out of control
- top rotor not spinning saturn x
- v911 spinning
- rc sky king helicopter transmitter wireing diagram
- 53 giant xxl gt-qs8006 3 5 ch 2 speed rc gyro metal helicopter remote led rtf
- accelerator helicopter manual
- how to fix a gyropter
- gyros helicopter s107g troubleshooting
- brookstone u control phantom ii rc helicopter top blade does not psin
- gyro master remote control helicopter won\t take off
- fixya battery fxd helicopter
- bladez metal tail rotor
- hammerhead blade wont take off
- u4 metal series helicopter
- syma s106 tail rotar does not turn
- v911 wobble
- trim problmes heli rc 3ch
- m tech gyro flyer problems
- mnul guide instruction for blade hammerhead helicopter
- my v911helicopter keeps spinning
- how to fix my Saturn-X 2CH IR RC Micro Helicopter rotator
- rc heli bottom rotor only spins when adjust trim
- i crashed my sr120 my back rotor came off now i cant trim out helicopter what can i do
- my new saturn x metal ir 2 channel helicopter doesn\t work
- blades wont spin on double horse
- gyropter helicopter wont fly fixing it
- double horse 9116 won\t stop spinning
- alloy helicopter upper propeler wont spin
- how to balance my gyro rc helicopter series 3ch-777
- gyro zoomer instructions
- 450helicopter co uk how-to-fix-your-rc-helicopter
- Gyro S107G Troubleshooting
- 2ch-777 helicopter
- spinning helicopter gyro problem
- saturn-x 2-channel rc helicopter top blades dont work
- sky king helicopter diagram
- saturn-x helicopter troubleshooting
- sky king rc helicopter qs8006 wont connect
- v911 trim
- World Tech Toys Phantom S107 troubleshoot
- syma rc helicopter main motor not function
- u4 gyro rc helicopter
- saturn x repair
- syma s107 helicopter just spins
- yhsm-imp1
- yhs-ifm1
- sky king helicopter problems
- v911 diagram
- trouble shoot gt model qs8006 heli not receiving transmitter siginal
- v911 helicopter spinning
- series 3ch 777 gyro helicopter instructions
- why doesn\t a double horse helicopter fly forward
- v911 helicopter wont turn
- v911 helicopter wont sync with remote
- v911 manual trim
- v911 just turns in circles
- troubleshooting saturn x helicopter
- toys helicoptar with wire circuit daigram
- syma s107g lower blades wont turn
- v911 wont hover why
- Trex helicopter wont propell
- where can i buy a tail rotor for the propel gyropter
- v911 won\t lift up the ground
- why did my bottom rotor on mySaturn-X 2CH IR RC Micro Helicopter stop working
- what part of the v911 rc helicopters circuit board is the gyro
- why does my c8 cyclone helicopter go sideways on take off?
- troubleshoot rc heicopter radio troubleshooting
- why does my propel helicopter spin in circles
- troubleshooting rear rotor motor rc helicopter
- videos re problems with sky king r c helicopters
- why is my qs8006 tail rotor cutting out
- saturn x 2ch ir helicopter not working
- v911 disassembly
- saturn x rotor wont turn
- world tech toys helicopter top wings dont spin
- the ripair kit for the cyropter
- saturn x helicopter circuit diagram
Related Articles
Hi my RC helicopter keeps going out of control even when I let go of the control stick
@taoistflyer Thanks for your answer! I found the problem.. The connect buckle was fitted improperly..
@trickytimmmmm it sounds more like a blade torque/imbalance between the 2 rotors, but probably not caused by a cracked gear, it may be that one of the rotors is not tracked properly, (meaning one blade is spinning higher then the other, look up rc helicopter blade tracking) causing extra torque.
you may be able to bend and monkey around with the rotors until they are both in track.
that puts a pentagram and a candle?
This video is a great help for all rchelicopterflyers!
I have a syma S106 (the newer version of the s008) but I have to trim it a lot to the left side… And when I press the stick to fly straight forward, it goes forward, but also to the left side.
Could this be the same problem as with the s008?
i just bought the cloud control RC helicopter and i replaced a broken wing and it’s not flying straight anymore… i tried this but that wasn’t the problem
@taoistflyer Thank you sir! its working now.
@Ferjon03 the gear may have simply slid off so that it spins freely instead of meshing with the other gear, take a look at the gears and make sure they are still touching.
hi i just bought a phantom 6010 with gyro from hongkong yesterday. it worked fine at first but after 10mins. the upper blade with the balancer seems loose and it doesnt spin when i start the my rc heli. is there a way to fix that? thanks
Ok I have a helicopter that is a bit bigger and it wobbles a lot can you help at all please i would love it my grampa gave it to me it is like 100$please help
I broke my Air Hogs havoc heli main rotor……Can it be replaced and how. please reply.
@budyzr63 this is common on less expensive coaxial helicopters without gyros, you have to manually correct for a lot of things.
@busterboy414 same here T_T
I hv a duel rotor heli with a tail rotor that gives it forward and back movement, my problem is everytime i make change in power on the throttle i hv2 adjust the trim, so I end up adjusting the trim constantly. I this just something I need to deal with or is there a fix?
@zorroisawes0me1 check the wires and make sure they are still connected to the motor and the circuit board.
@RonJosueCas it may be how the 2 gears mesh together, if the small gear on the motor shaft is to close or to far away from the larger gear they can grind and sometimes stick , sometimes the small gear is sliding off the motor shaft a little bit and sometimes it’s just to far away from the gear, sometimes the gear teeth are actually messed up and cracked or to small, and sometimes it’s just a disconnected motor wire.
Mine Has Ropes Shall I Cut The Ropes Off?
the tail rotor of my helicopter has stopped moving completly and i cant go foward or back now. everything else is fine but that….is there a way to fix that?
My lower wings spin good and strong but my top wings don’t. The weight on the very top is fine , it just seems to be the thing on the shaft holding the wings that’s bent. It’s the syma s107 rc helicopter and it’s brand new only flew for about five 5 minute periods before carefully charging, I’ve not crashed it and it’s not the battery , WTF … Please help
the gears (probally the stupidest thing I could’ve done), anyhow after taking off the top two blades quite easily might I add, I noticed the small rod that controlled the top two blades, I tried to rotate that with my fingers it worked fine, I then used my remote control without the top two blades attached and the gears were spinning and everything, but I noticed the bottom gears/cogs stopped almost immediatly, if anyone can help me out that’d be great, merry christmas everyone
I just got mine for christmas worked fine I got scared when I came close to the wall and I stopped paying attention to my pressure (i’m a begginer at this), anyhow after the crash my top two blades stopped rotating, my bottom blade is working fine, I looked up a quick fix for this they said to tighten the main gears by pushing down the rotor shaft (me being technically handicap I wasn’t sure what this was or what this is for that matter) I tryied to just push the top of the helicopter down onto
I believe I have a broken shaft. I can hear the motor running but the main rotor isn’t spinning in fact it will fall out if the heli is inverted. Is there a fix for this?
@getampedtutorials It might be broken shaft if you had crushed into something. See if the motor is spinning and the blade is not.
my lower wings wont spin, but my upper wings do. what should I do? i know its not a battery problem because the upper wings spins really fast like normal.
@NuggetsOfRivendell then it could be a battery issue.